Metadata-Version: 1.2
Name: xml2rfc
Version: 2.30.0
Summary: Xml2rfc generates RFCs and IETF drafts from document source in XML according to the IETF xml2rfc v2 and v3 vocabularies.
Home-page: https://tools.ietf.org/tools/xml2rfc/trac/
Author: Henrik Levkowetz, Josh Bothun
Author-email: tools-discuss@ietf.org
Maintainer: Henrik Levkowetz
Maintainer-email: henrik@levkowetz.com
License: BSD-3-Clause
Download-URL: https://pypi.python.org/pypi/xml2rfc
Description: Introduction
        ============
        
        The IETF_ uses a specific format for the standards and other documents it
        publishes as RFCs_, and for the draft documents which are produced when
        developing documents for publications.  There exists a number of different
        tools to facilitate the formatting of drafts and RFCs according to the
        existing rules, and this tool, **xml2rfc**, is one of them.  It takes as input
        an xml file which contains the text and meta-information about author names
        etc., and transforms it into suitably formatted output.  The input xml file
        should follow the grammars in RFC7749_ (for v2 documents) or RFC7991_ (for 
        v3 documents). Note that the grammar for v3 is still being refined, and 
        changes will eventually be captured in the `bis draft for 7991`_. 
        Changes not yet captured can be seen in the xml2rfc source `v3.rng`_.
        
        **xml2rfc** provides a variety of output formats. See the command line
        help for a full list of formats. It also provides conversion from v2 to
        v3, and can run the preptool_ on its input.
        
        .. _IETF: https://www.ietf.org/
        .. _RFCs: https://www.rfc-editor.org/
        .. _RFC7749: https://tools.ietf.org/html/rfc7749
        .. _RFC7991: https://tools.ietf.org/html/rfc7991
        .. _bis draft for 7991: https://tools.ietf.org/html/draft-iab-rfc7991bis
        .. _v3.rng: https://trac.tools.ietf.org/tools/xml2rfc/trac/browser/trunk/cli/xml2rfc/data/v3.rng
        .. _preptool: https://tools.ietf.org/html/rfc7998
        
        Installation
        ============
        
        Installation of the python package is done as usual with 'pip install xml2rfc',
        using appropriate switches and/or sudo.
        
        Installation of support libraries for the PDF-formatter
        -------------------------------------------------------
        
        In order to generate PDFs, xml2rfc uses the WeasyPrint module, which
        depends on external libaries that must be installed as native packages
        on your platform, separately from the xml2rfc install.
        
        First, install the Cairo, Pango, and GDK-PixBuf library files on your
        system.  See installation instructions on the WeasyPrint Docs:
        
            https://weasyprint.readthedocs.io/en/stable/install.html
        
        (Python 3 is not needed if your system Python is 2.7, though).
        
        (On some OS X systems with System Integrity Protection active, you may
        need to create a symlink from your home directory to the library installation
        directory (often /opt/local/lib):
        
            ln -s /opt/local/lib ~/lib
        
        in order for weasyprint to find the installed cairo and pango libraries.
        Whether this is needed or not depends on whether you used macports or homebrew
        to install cairo and pango, and the homebrew / macport version.)
        
        Next, install the pycairo and weasyprint python modules using pip.
        Depending on your system, you may need to use 'sudo' or install in
        user-specific directories, using the --user switch.  On OS X in
        particular, you may also need to install a newer version of setuptools
        using --user before weasyprint can be installed.  If you install with 
        the --user switch, you may need to also set PYTHONPATH, e.g.,
        
            PYTHONPATH=/Users/henrik/Library/Python/2.7/lib/python/site-packages
        
        for Python 2.7.
        
        The basic pip commands (modify as needed according to the text above)
        are:
        
            pip install 'pycairo>=1.18' 'weasyprint<=0.42.3'
        
        With these installed and available to xml2rfc, the --pdf switch will be
        enabled.
        
        For PDF output, you also need to install the Noto font set.  Download the full
        set from https://noto-website-2.storage.googleapis.com/pkgs/Noto-unhinted.zip,
        and install as appropriate for your platform.
        
        Usage
        =====
        
        xml2rfc accepts a single XML document as input and outputs to one or more conversion formats.
        
        **Basic Usage**: ``xml2rfc SOURCE [options] FORMATS...``
        
        Run ``xml2rfc --help`` for a full listing of command-line options.
        
        
        Changelog
        =========
        
        
        Version 2.30.0 (19 Sep 2019)
        ------------------------------------------------
        
        
          * Added logging configuration for weasyprint.  This controls the logging
            level based on the --quiet and --verbose flags, and should make
            weasyprint logging ouput more consistent across systems.
        
          * Weasyprint reports ERROR if a CSS <link> URL isn't available, so we
            won't insert a <link> for "rfc-local.css" when generating PDF if the
            file doesn't exist.
        
          * Tweaked the Makefile to use --add-include in some cases, for regression 
            testing.
        
          * Corrected the <xi:include> links produced during v2v3 conversion with
            the --add-xinclude switch, 
        
          * Changed the code to not retain <!ENTITY> declarations after v2v3
            conversion.
        
          * Changed BaseV3Writer.die() to raise an exception, rather than exit on 
            the spot, in order to do the right thing when called as a library.
        
          * Tweaked the command-line messages when a fatal error is raised in a 
            writer.
        
        
        
        
        
        
        
        Version 2.29.1 (18 Sep 2019)
        ------------------------------------------------
        
        
          * Fixed an issue with pagination that could occur if a table (or other 
            block) longer than a page ended on the last page.
        
        
        
        
        
        
        
        Version 2.29.0 (17 Sep 2019)
        ------------------------------------------------
        
        
          * Adjusted the handling of ASCII, Latin, and non-Latin names and
            abbreviation in the v3 text formatter to act the same way as the v3
            HTML formatter.
        
          * Added RFC #### to the HTML rendered document title (for RFCs).
        
          * Added <artset> in the schema in two places that were missed when 
            first introducing it.
        
          * Changed the metadata json URL to avoid CORS issues due to redirects.
            Added a missing JS 'var' keyword and fixed a typo.
        
          * Handled a file open mode deprecation issue.  Fixes issue #427.
        
          * Added 'table' to the internal list of block-level elements.
        
          * Added the traditional default 'Network Working Group' to the top of 
            HTML output for drafts.
        
        
        
        
        
        
Platform: UNKNOWN
Classifier: Development Status :: 5 - Production/Stable
Classifier: Environment :: Console
Classifier: Operating System :: MacOS :: MacOS X
Classifier: Operating System :: Microsoft :: Windows
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python
Classifier: Topic :: Text Processing
Classifier: Topic :: Text Processing :: Markup :: XML
Classifier: License :: OSI Approved :: BSD License
